카다로그 & 매뉴얼
휴대형 멀티미터 DT4255
* 이미지는 참조용으로만 사용하십시오. 제품사양을 참조하세요
제품소개
The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to
industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing
to a higher level. The DT4255 is a digital multimeter designed for maximum safety with voltage measurement
terminals that are protected by a fuse.
주요특징 및 기능
• Prevents short-circuit accidents with a fast-blow fuse and current-limiting resistor
• Prevents accidents with clamp-on sensor-based current measurement
• Voltage detection function
• Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
• Broad -25°C (-13°F) to 65°C (149°F) operating temperature range
• Dual display lets you check voltage and frequency simultaneously
• CAT IV 600V/ CAT III 1000V Safety
제품사양
DC voltage | 600.0 mV to 1000 V 5 ranges, Basic accuracy: ±0.3 % rdg. ±3 dgt. |
AC voltage | 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz - 1 kHz |
Basic accuracy 40 - 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3) | |
AUTO AC/DCV | Yes |
Resistance | 600.0 Ω to 60.00 MΩ, 6 ranges, Basic accuracy: ±0.7 % rdg. ±3 dgt. |
DC current | - |
From 4 to 20mA | - |
Percentage conversion display | |
AC Current (use with Clamp on probes) |
10.00 A to 1000 A, 7 ranges, |
Add the Clamp on probe accuracy to basic accuracy 40 - 1 kHz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3) | |
Temperature (thermocouples) | - |
Voltage detection | Hi: AC40 V to 600 V, Lo: AC80 V to 600 V |
C (capacitance) | 1.000 μF to 10.00 mF, 5 ranges, Basic accuracy: ±1.9 % rdg. ±5 dgt. |
Frequency | 99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage), |
Basic accuracy: ±0.1 % rdg. ±1 dgt. | |
Continuity Check | Continuity threshold [ON]: 25 Ω or less , |
[OFF]: 245 Ω or more, | |
Response time: 0.5 ms or more | |
Diode test | Open terminal voltage: 5.0 V or less, Testing current 0.5 mA or less, |
Threshold of forward voltage: 0.15 V to 1.5 V | |
Other functions | Filter function, Display value hold, Auto hold, Max/Min/Average value display, Relative display, Auto-power save, USB communication (option) |
Display | Main and sub displays: 4-digits LCD, max. 6000 digits, bar graph |
Display refresh rates | 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s) |
Power supply | LR03 alkaline batteries ×4, Continuous use: 130 hours (backlight OFF) |
Dimensions | 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D |
주문정보
Warranty
• 3 YRs
Contents
• DT4255 Digital Multimeter - with fused measurement terminals
• Test Lead
• Instruction Manual
• Holster
• Alkaline Batteries
※ 자세한 사항은 상단 다운로드 'Datasheet'나 'Manual'을 참조해 주세요.
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?