카다로그 & 매뉴얼
휴대형 멀티미터 DT4253
* 이미지는 참조용으로만 사용하십시오. 제품사양을 참조하세요
제품소개
The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to
industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing
to a higher level. The DT4253 is a digital multimeter designed specifically for HVAC testing, with ±0.5% DC V
accuracy, temperature and clamp sensor testing, and wide 40 Hz to 1kHz bandwidth.
주요특징 및 기능
• Ideal for measuring currents ranging from instrumentation signals (4 to 20 mA) to flame currents (μA)
with built in high-sensitivity current ranges
• Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
• Dual display lets you check voltage and frequency simultaneously
• CAT IV 600V/ CAT III 1000V Safety
제품사양
| DC voltage | 600.0 mV to 1000 V, 5 ranges Basic accuracy: ±0.3 % rdg. ±5 dgt. |
| AC voltage | 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz - 1 kHz |
| Basic accuracy 40 - 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3) | |
| AUTO AC/DCV | Yes |
| Resistance | 600.0 Ω to 60.00 MΩ, 6 ranges, Basic accuracy: ±0.7 % rdg. ±5 dgt. |
| DC current | 60.00 μA to 60.00 mA, 4 ranges, Basic accuracy: ±0.8 % rdg. ±5 dgt. |
| From 4 to 20mA | Yes |
| Percentage conversion display | |
| AC Current (use with Clamp on probes) | 10.00 A to 1000 A, 7 ranges, |
| Add the Clamp on probe accuracy to basic accuracy 40 - 1 kHz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3) | |
| Temperature (thermocouples) | (thermocouples) K: -40.0 to 400.0 °C , |
| Add the Temperature probe accuracy to basic accuracy: ±0.5 % rdg. ±2 °C | |
| Voltage detection | - |
| C (capacitance) | 1.000 μF to 10.00 mF, 5 ranges, Basic accuracy: ±1.9 % rdg. ±5 dgt. |
| Frequency | 99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage), |
| Basic accuracy: ±0.1 % rdg. ±1 dgt. | |
| Continuity Check | Continuity threshold [ON]: 25 Ω or less (Indicate buzzer sound, red LED), |
| [OFF]: 245 Ω or more | |
| Response time: 0.5 ms or more | |
| Diode test | Open terminal voltage: 5.0 V or less, Testing current 0.5 mA or less, |
| Threshold of forward voltage: 0.15 V to 1.5 V | |
| Other functions | Filter function, Display value hold, Auto hold, Max/Min/Average value display, Relative display, Auto-power save, USB communication (option) |
| Display | Main and sub displays: 4-digits LCD, max. 6000 digits, bar graph |
| Display refresh rates | 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s) |
| Power supply | LR03 alkaline batteries ×4, Continuous use: 130 hours (backlight OFF) |
| Dimensions | 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D |
주문정보
Warranty
• 3 YRs
Contents
• DT4254 Digital Multimeter - with mA DC, temperature
• Test Lead
• Instruction Manual
• Holster
• Alkaline Batteries
※ 자세한 사항은 상단 다운로드 'Datasheet'나 'Manual'을 참조해 주세요.
상품필수 정보
- 품명 및 모델명
- 상품상세 참조
- 제조국 또는 원산지
- 상품상세 참조
- 제조자, 수입품의 경우 수입자를 함께 표기
- 상품상세 참조
- A/S 책임자와 전화번호 또는 소비자상담 관련 전화번호
- 상품상세 참조
- 법에 의한 인증·허가 등을 받았음을 확인할 수 있는 경우 그에 대한 사항
- 상품상세 참조
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?