다운로드
APS-7100 AC Power Source
제품소개
주요 특징 및 기능
• 모델명 : APS-7100
• 1CH (Single output)
• AC 전력 : 1kVA
• AC 출력 전압 : 0~155Vrms/310Vrms/600Vrms(옵션)
• 전류 : 8.1A / 4.2A (APS-7100)
• 인터페이스 : USB(Host)/LAN, GPIB(옵션), RS232/USB CDC(옵션)
• 4.3인치 TFT LCD 디스플레이
• 88mm (2U) 케이스 높이 설계
• 임의파형 출력 기능
• 10세트 시퀸스 모드, 시뮬레이션 모드, 프로그래밍 모드, 프리셋 저장/호출 기능
• SYNC 출력, 프로그램 모드 신호 출력, 트리거 IN/OUT,출력 ON/OFF
• 전압, 전류, 전력, 피상전력, 전류(피크), IPKH, 주파수, 역률, 파고율 측정 기능
제품사양
사양 | |||||
APS-7050 | APS-7100 | APS-7200 | APS-7300 | ||
AC OUTPUT | |||||
Power Rating | 500VA | 1000VA | 2000VA | 3000VA | |
Output Voltage | 0 ~155Vrms, 0 ~ 310Vrms | ||||
Output Frequency | 45.00 ~500.0 Hz | ||||
Max. Current(rms) *1 | 0 ~ 155 Vrms | 4.2A | 8.4A | 16.8A | 25.2A |
0~ 310 Vrms | 2.1A | 4.2A | 8.4A | 12.6A | |
Max. Current (peak) | 0 ~ 155 Vrms | 16.8A | 33.6A | 67.2A | 100.8A |
0~ 310 Vrms | 8.4A | 16.8A | 33.6A | 50.4A | |
OPT.APS-003(rms) | 0 ~ 600 Vrms | 1.05A | 2.1A | 4.2A | 6.3A |
OPT.APS-003(peak) | 0 ~ 600 Vrms | 4.2A | 8.4A | 16.8A | 25.2A |
Total Harmonic Distortion (THD) *2 | ≤ 0.5% at45 ~ 500.0Hz (Resistive Load) | ||||
Crest factor | ≥ 4 | ||||
Line regulation | 0.1% (% offull scale) | ||||
Load regulation | 0.5% (% offull scale) | ||||
Response time | < 100µS | ||||
Reverse current | 30% ofMaximum Output RMS Current (Continue) | ||||
100% of Maximum Output RMS Current (Within 3 minutes) | |||||
SETTING | |||||
Voltage | Range | 0 ~155Vrms, 0 ~ 310Vrms, Auto | |||
Resolution | 0.01Vat 0.00 ~ 99.99Vrms | ||||
0.1V at 100.0 ~ 310.0Vrms | |||||
Accuracy | ±(0.5% of setting + 2 counts) | ||||
Frequency | Range | 45 ~500 Hz | |||
Resolution | 0.01Hz at45.00 ~ 99.99Hz | ||||
0.1Hz at 100.0 ~ 500.0Hz | |||||
Accuracy | ± 0.02% ofSetting | ||||
Power on/off phase angle | Range | 0 ~359° | |||
Resolution | 1° | ||||
Accuracy | ± 1° (Only45 ~ 65Hz) | ||||
Measurement *3 | |||||
Voltage (rms) | Range | 0.20 ~38.75Vrms | |||
38.76 ~ 77.50Vrms | |||||
77.51 ~ 155.0Vrms | |||||
155.1 ~ 310.0Vrms | |||||
Resolution | 0.01V at0.00 ~ 99.99Vrms | ||||
0.1V at 100.0 ~ 310.0Vrms | |||||
Accuracy*4 | ± (0.5% ofreading + 2 counts) | ||||
Frequency | Range | 45 ~ 500Hz | |||
Resolution | 0.01Hz at45.00 ~ 99.99Hz | ||||
0.1Hz at 100.0 ~ 500.0Hz | |||||
Accuracy | ± 0.1Hz | ||||
Current (rms) | Range | 2.00 ~70.00mA | 0.200 ~3.500A | ||
60.0 ~ 350.0mA | 3.00 ~35.00A | ||||
0.300 ~ 3.500A | |||||
3.00 ~ 17.50A | |||||
Resolution | 0.01mA | 0.001A | |||
0.1mA | 0.01A | ||||
0.001A | |||||
0.01A | |||||
Accuracy | ± (0.6% ofreading + 5 counts) , 2.00 ~ 350.0mA | ± (0.5% ofreading + 5 counts) , 0.200 ~ 3.500A | |||
± (0.5% of reading + 5 counts) , 0.300 ~ 3.500A | ± (0.5% ofreading + 3 counts) , 3.00 ~ 35.00A | ||||
± (0.5% of reading + 3 counts) , 3.000 ~ 17.50A | |||||
Current (peak) | Range | 0.0 ~ 70.0A | 0.0 ~140.0A | ||
Resolution | 0.1A | 0.1A | |||
Accuracy | ± (1% ofreading + 1 counts) | ± (1% ofreading + 1 counts) | |||
Power (W) | Resolution | 0.01W | 0.1W | ||
0.1W | 1W | ||||
1W | |||||
Accuracy | ±(0.6% of reading + 5 counts) , 0.20 ~ 99.99W | ± (0.6% ofreading + 5counts) , 0.2 ~ 999.9W | |||
± (0.6% of reading + 5 counts) , 100.0 ~ 999.9W | ± (0.6% ofreading + 2counts) , 1000 ~ 9999W | ||||
± (0.6% of reading + 2 counts) , 1000 ~ 9999W | |||||
Apparent Power (VA) | Resolution | 0.01VA | 0.1VA | ||
0.1VA | 1VA | ||||
1VA | |||||
Accuracy | ± (1% ofreading + 7 counts) , 0.20 ~ 99.99VA | ± (1% ofreading + 7 counts) , 0.2 ~ 999.9VA | |||
± (1% of reading + 7 counts) , 100.0 ~ 999.9VA | ± (1% ofreading + 5 counts) , 1000 ~ 9999VA | ||||
± (1% of reading + 5 counts) , 1000 ~ 9999VA | |||||
Power Factor | Resolution | 0.001 | |||
Accuracy | ±2% reading+ 2 counts | ||||
General | |||||
Remote output signal | Pass, Fail,Test-in Process, Trigger in, Trigger out, OUT ON/OFF | ||||
Sync output signal | OutputSignal 10 V, BNC Type | ||||
Number of Preset | 10 (0~9numeric keys) | ||||
Protection | OCP, OPP,OTP and Alarm | ||||
Trigger Out | Maximum lowlevel output = 0.8V | ||||
Minimum high level output = 2V | |||||
Maximum source current = 8mA. | |||||
Trigger In | Maximum lowlevel input voltage = 0.8V | ||||
Minimum high level input voltage = 2.0V | |||||
Maximum sink current = 8mA. | |||||
SEQUENCE / SIMULATION FUNCTION | |||||
Number of Memories | 10 (0~9numeric keys) | ||||
Number of Steps | 255 max.(for 1 sequence) | ||||
Step Time Setting Range | 0.01 ~999.99 S | ||||
Operation within Step | Constant,Keep, Linear Sweep | ||||
Parameters | OuptutRange, Frequency, Waveform (sine wave only), On Phase, Off Phase, TermJump Count (0 ~255), Jump-to, Branch 1, Branch 2, Trigger Output | ||||
Sequence Control | Start,Stop, Hold, Continue, Branch 1, Branch 2 | ||||
AC Input | |||||
Phase | SinglePhase | ||||
Input Voltage | 115/230Vac± 15% | 230Vac ±15% | |||
Input Frequency | 50/60Hz | ||||
Max. Current | 16A/8A | 32A/16A | 32A | 50A | |
Power Factor | 0.7 Typ. | ||||
Enviromental Conditions | |||||
Operating temperature range | 0 ~ +40 ℃ | ||||
Storage temperature range | -10 ~ +70 ℃ | ||||
Operating humidity range | 20 ~ 80% RH(no condensation) | ||||
Storage humidity range | 80% RH orless (no condensation) | ||||
Interface | |||||
Standard | USB Host,LAN | USB Host,USB CDC, LAN | |||
Optional | GPIB(APS-001) | GPIB(APS-001) | |||
RS232 / USB CDC (APS-002) | RS232(APS-007) | ||||
Dimensions & Weight | |||||
Dimensions(mm) | W | 430 | 430 | 430 | 430 |
H | 89 | 89 | 312 | 400 | |
D | 400 | 560 | 650 | 650 | |
Weight | 24Kg | 38Kg | 90Kg | 128Kg |
주문정보
Warranty
• 1년
Contents
• 사용 설명서CD x1
• 단자 덮개 세트 x1
• 테스트 리드 GTL-123 x 1
• 전원 코드 x1
※ 자세한 사항은 'DataSheet'나 'Quick Start Guide'를 참조해 주세요.
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?