19572 Ground Bond Tester
Product Overview
GROUND BOND TESTER Model:19572
The Chroma 19572 provides high current testing of ground continuity between chassis and power cord ground on a wide
variety of electrical products and appliances.
The unit is designed for maximum flexibility and operation convenience in mind. The simple front panel of the tester requires
less effort to operate. The Digital display and user friendly control allow test parameters and limits to be set easily without
activating the high voltage. The instrument can be put on line rapidly. It can provide operators useful measurements with little
to no training. The use of a high current AC test provides a better simulation of how the ground on the device would perform
under actual conditions if the motor or wiring was to short to ground. This verifies that the grounds in the device can handle
30 or 40 Amps until a circuit breaker trips or fuse blows. Most European standards such as TUV, CE, VDE, UL and CSA
recommend this type of testing. In contrast, the ground continuity test that is provided as part of most hipot testers just
checks to make sure there is a connection.
Key Features
• TUV approved
• CE certified
• High current ground continuity testing up to 45Amps
• Resistance measurements from 0.1m up to 45Amps Large
• LCD display (240 x 64dot matrix) Can supply great view of test result and setting functions
• Programmable high and low resistance limits
• Adjustable test time from 0.5 to 999 seconds or continue
• Built-in calibration via software
• Automatic offset of lead resistance
• Built-in resistance compensation function
• Compatible with the 19070 series Hi-pot Tester
• Digital readout of current, resistance and test time
• Front panel lockout
• Remote control
• 10 steps or 99 groups for total 500 memory locations
• Beeper on/off
• Easy to use
Spec Comparison
Ordering Information
Warranty
• 1년
Contents
• 기본
※ 자세한 사항은 'DataSheet'나 'Quick Start Guide'를 참조해 주세요.
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?