필수정보

DT-9935  Digital LCR Meter

Product Overview

​​DT-9935 Professional LCR Meter

9935 LCR Meter features with an innovative automatic selection technology, automatically measuring L,C and R with Q,D and

θ by just turn on the meter. The testing frequency is up to 10KHz and it can output up to 100KHz test frequency. 

It provides high accuracy with four or fi ve terminal Kelvin measurements.

1. Overload Indication

2. Lower Battery Indication

3. Auto Power Off

Key Features

DIGITAL LCR-Q METER 

• Dual LCD display

• Auto LCR smart check and measurement

• Series/Parallel modes are selectable

• Ls/Lp/Cs/Cp with D/Q/θ/ESR parameters

• Support DCR mode 200.00Ω ~ 200.0MΩ

• Five different test frequency are available: 100/120/1k/10k/ 100k Hz

• Test AC signal level: 0.6mVRMS typ.

• Test range: (ex. F=1kHz) L : 200.00 μH ~ 2000.0 H C : 2000.0 pF ~ 2.000 mF R : 20.000 Ω ~ 200.0 MΩ

• Multi-level battery voltage detector

• Support Backlight & Buzzer sound driver

• Primary Parameters Display: 

        DCR : DC Resistance Ls : Serial Inductance 

        Lp : Parallel Inductance Cs : Serial Capacitance 

        Cp : Parallel Capacitance Rs : Serial Resistance 

        Rp : Parallel Resistance

• Second Parameter Display: 

        θ : Phase Angle ESR : Equivalence Serial Resistance 

        D : Dissipation Factor Q : Quality Factor

• Auto power off

• Battery detect

• Hold mode

• Relative mode 

Spec Comparison  

Ordering Information  

 ​​ 

Warranty

• 1 년

Contents

• 본체

• 테스트 클립 

• 측정 프로브

• 핀 프로브

• 케이블

• 악어클립 

※ 자세한 사항은 'DataSheet'나 'Quick Start Guide'를 참조해 주세요.