필수정보

Leakage Current Mini Clamp-on; 3/30mA/30/60 Amp

Mean Value

(Bar-graph display: 32 segments)
LCD (Digital display: 3200 counts)

Auto-range

0 - 50°, 80% RH or less (no condensation)

0.0005% typical 1 (on current value of adjacent cable)

Within accuracy

Approved for conformity to EN 61010-1,EN 61010-2-032

300 Vrms or less

3.7 kV AC for one minute

One CR2032 (Coin-shaped) 3 V battery

Approx. 90 hours (when continuously used)

Approx. 10 minutes

40 at maximum mm

Approx. 70 (W) x 176 (H) x 25 (D) mm

Approx. 200 g

Instruction manual, battery, Soft case

3/30 mA, 30/60A

50/60 Hz

1.0 + 5 (0~30mA)
1.0 + 5 (0~50A)
5.0 + 5 (50~60A)

2 times/second (Digital display), 12 times/second (Bar-graph display)

0.05% of range /°C or less (within the ranges of 0-18° and 28-50° for measurement of 0-50 A)

• Can measure leakage currents of 1 mA, which is useful for checking the insulation of low-voltage circuits              and electrical components.
• Can measure a broad range of currents from leakage currents (at a resolution of 0.001 mA) to load currents         up to 60 A.
• Typical influence (on the current value of an adjacent cable) from an external magnetic field is 0.0005%.
• Durability of clamp: More than 50,000 opening/closing events
• Twice the tensional strength of Yokogawa M&C's earlier model clamps
• The clamp lever is lengthened by 30%, enabling smooth opening/closing of the clamp even for thick cables            of 40mm in diameter.
• Approved for conformity to safety standards EN 61010-1 and EN 61010-2-032 (CAT III 300V, pollution                  degree2)

3/30mA, 30/60A

50/60Hz

50/60Hz

1.0 + 5(0~30mA)

1.0 + 5(0~50A)

5.0 + 5 (50-60A)